The hallmark of Cerious Technologies Digital interconnect designs is conductor sizes never before seen in interconnects. The ground conductors employ a combination of 18-gauge solid Large Crystal Silver and multiple Mirror Surface Silver ribbons brought into intimate contact through silver compression collars on each end of the conductor resulting in a combined 12 gauge! The conductor is pulled under pressure into a flexible 10-gauge Teflon tube forcing the multiple conductors into intimate contact.
Each positive conductor employs a solid 18-gauge 99.9999% pure Large Crystal Silver conductor hand polished to a mirror finish, 48,000 strands of Toray Carbon Fiber treated with a surface agent that roughs up the individual strands creating jagged areas for the Graphene to “fill”, a lattice weave of 38-gauge (extremely fine) silver wire and aqueous Graphene. This lattice weave creates voids that are readily occupied by the aqueous Graphene. Together these form a conductor equivalent to an 8-gauge conductor.
More importantly each conductor behaves as a single solid core conductor, but with a greater conductivity in the center of the conductor than on the outside of the conductor. This characteristic creates a conductor that inherently fights any surface effects and focuses signal transmission in a single plane through the center lowering the total time constant and virtually eliminating any time smear from the signal traveling across the cross section of the conductor. It is inherently non-magnetic and extremely inefficient at generating electric fields minimizing back EMF and “Ghost” signals that are created as the EMF collapses back into the cable.
How is this done? Cerious has developed a proprietary method of forcing the aqueous Graphene into the smallest nook by injecting it under pressure. After each conductor or “Damping Jacket” (both employ the same Aqueous Graphene) is “filled” the entire cable is placed in a vacuum chamber extracting every pocket of oxygen and pulling the Graphene into intimate contact with the pure Silver and Carbon Fiber backbone fusing it into one coherent conductor.
Through this process we have achieved an increase of over 20% concentration of Graphene in each conductor versus Graphene Matrix V2.0. The introduction of our aqueous Graphene solution in our damping jackets has resulted in damping at the atomic level for both our individual conductors and cables as a whole.
Graphene Lumniscate is available in either SPDIF Single Ended RCA or Balanced AES/EBU XLR configurations.
The result is a Digital cable that extracts more detail while maintaining an Organic listening experience. Graphene Lumniscate sets new standards for transparency and neutrality, which are hallmarks of all Cerious Technologies products.